Ex-demo NIGHTTRAIN 170 complete SRAM DH build bike from our Whistler demo fleet, size S2, Black.
Condition
- Tires worn
- General wear and tear
Build Specs
- Frame: NIGHTTRAIN Alloy 170mm, size S2, Black
- Wheel Size: 29"
- Fork: Fox Factory 40 Grip X2, 190mm,
- Rear Shock: Fox Factory Float X2, 230 x 65mm, 2 Pos Lever
- Headset: Cane Creek 40, ZS44/28.6/H8 | ZS56/40 w/ 52/30 crown race
- Brakes: SRAM Maven (black), 200mm rotors
- Drivetrain: SRAM GX DH 7-speed
- Crank & Bottom Bracket: SRAM DUB, Cane Creek BB
- Chainring: RMU 27t Chainring (SRAM 8-bolt)
- Wheels: Industry Nine Triad
- Tires: Maxxis Minion DH (front and rear)
- Handlebar: RaceFace
- Stem: OneUp
- Grips: RaceFace Chester 31mm
- Seatpost: SDG
- Saddle: SDG Apollo
Build Notes
- Rear hub spacing 12 x 157 SB
- Crankset spacing 136mm Boost
- BB 73mm BSA threaded
- Compatible cranksets: SRAM 8-bolt and RaceFace Cinch
- Seat clamp 34.9mm
- Seatpost 31.6mm
- RockShox Super Deluxe not compatible
Good to know
- All damage is shown in the photos.
- Every bike is tuned by our shop before it ships.
- Any build changes from our standard kit are listed above.
About Orion
Dave Weagle's Orion Dynamics is the latest in a long line of his industry defining suspension platforms. The Orion design provides an efficient and stable pedaling response on both smooth terrain and in the rough, and without even a hint of pedal feedback. Exceptional mid-travel square-edged bump compliance creates continuous traction in varied terrain so you're always in control. Optimized for single-chainring big range drivetrains, its two short links work in concert to provide controlled lateral stiffness and keep braking forces in check when the trail gets rough. Seated or standing, climbing or cornering, jumping or hammering rock gardens, Orion does it all and does it well.
Dual Idler
Dave Weagle invented the dual idler as a suspension solution to achieve a mid-pivot vertical chainline location without the efficiency loss drawbacks of a single idler. The dual idler is a thoughtfully engineered dual chain layout that uses large odd numbered tooth primary chainrings coupled with an even number of chain links. This makes for very low chain wear and great chain life, while using 100 year old chain engineering principles to gain extremely efficient power transfer to the secondary drive. At the same time the elevated slack side of the chain dramatically reduces pedal feedback and the effect of the rear derailleur clutch on the suspension.
BIKE GEO

| S1 (SM) | S2 (M) | S3 (L) | S4 (XL) | |
|---|---|---|---|---|
| A. Reach | 440 | 465 | 485 | 510 |
| B. Stack | 623 | 632 | 643 | 654 |
| C. Effective Top Tube Length | 557 | 586 | 614 | 632 |
| D. Seat Tube Length | 374 | 387 | 387 | 425 |
| E. Effective Seat Tube Angle | 77.5 | 77.5 | 77.5 | 77.5 |
| F. Headtube Length | 100 | 110 | 122.5 | 135 |
| G. Headtube Angle | 63 | 63 | 63 | 63 |
| H. Static Chainstay Length | 426 | 430 | 434 | 438 |
| I. Wheelbase | 1219 | 1252 | 1282 | 1316 |
| J. Bottom Bracket Drop | 26.5 | 26.5 | 26.5 | 26.5 |
| K. Estimated Bottom Bracket Height | 348.5 | 348.5 | 348.5 | 348.5 |
| M. Mechanical Trail | 127 | 127 | 127.15 | 127.15 |
FAQs
Rear Wheel Travel: 170mm
Rear Shock: Standard 230x65mm
Fork Axle to Crown: 586mm (Fox 38 Factory 170mm)
Fork Offset: 44mm
Headtube: ZS44 Upper / ZS56 Lower
Seatpost Diameter: 31.6mm
Seatclamp Diameter: 34.9mm
Rear Wheel Diameter: 29"
Maximum Rear Tire Size: 29" x 2.5" (Varies By Brand)
Bottom Bracket Shell: BSA 73mm Threaded
Chainline: 55mm
Lower Chainring: RMU 27T SRAM 8 Bolt or Raceface Cinch Chainring
Upper Idler Chainring Size: 20T
Rear Derailleur Hanger: SRAM Universal Derailleur Hanger
Rear Wheel Spacing: 12mm x 157mm
Rear Axle Size: 12mm x 188-190mm 1.0 Thread Pitch
Rear Brake Mount Type: Post Mount 200mm
Maximum Rear Rotor Size: 220mm
Idler chain: 38 links, 10/11/12 speed compatible
Build your own frame, colour and build kit on the NIGHTTRAIN 170 page.


